Dongguan stamping parts, using technology to highlight the results of stamping parts

Dongguan stamping parts, technology has always been a need for unremitting efforts in the industry, and there is no limit to learning. Behind every exquisite and qualified stamping part, it is the result of the hard work of the stamping people. Stamping die is a prerequisite for qualification, and what issues should be paid attention to when assembling stamping die: Xiaoshuo will take you to understand: 1. When assembling, ensure that the gap between the male and female dies is uniform, and the fit gap conforms to the design. Requirement 2. The joint surface between the insert and the template and the insert is close. 3. The height of the cutting edge of the blanking and punching die is manufactured according to the design requirements to ensure that the leaking hole is unblocked. 4. The movement of all movable parts of the die should be It is stable and has no stagnation. When the slider and wedge move on the fixed sliding surface, the minimum contact area is not less than two-quarters of their area. 5. The screws and pins used for fastening shall not be loosened, and the end faces of the screws and pins shall not protrude from the plane of the upper and lower molds. Hardware, 15 years of craftsmanship focusing on Dongguan stamping parts, 20,000+ sets of customized mold production experience, daily production capacity of 3 million punching times, stamping accuracy up to ±0.01mm, and 16 quality inspections to strictly control the quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!