Jiangmen metal stamping parts processing plant, material selection + raw materials imported and national standard original factory
The production staff of the Jiangmen metal stamping parts processing plant said that the surface and internal properties of the stamping sheet material have a great influence on the quality of the stamped product. The following Xiaoshuo takes everyone to see what are the requirements for stamping materials: ① The thickness is accurate and uniform. The stamping die is precise and has a small gap. If the thickness of the sheet is too large, it will increase the deformation force, and cause jamming, and even burst the die. If the sheet is too thin, it will affect the quality of the finished product and even crack during deep drawing. ② The surface is smooth, no spots, no scars, no scratches, no surface cracks, etc. All surface defects will remain on the surface of the finished workpiece, and the crack defects may extend deep and wide during the process of bending, deep drawing, and forming, resulting in waste products. ③ The yield strength is uniform and there is no obvious directionality. Anisotropy (see plastic deformation in the drawing, flanging, bulging and other stamping processes, due to the occurrence of all-directional yielding, the inconsistent amount of plastic deformation will cause uneven deformation and inaccurate forming. Defective or scrap. Hardware, 15 years of craftsmanship focusing on metal stamping parts processing, 20,000+ sets of stamping die custom production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk The general stamping accuracy can reach 0.01mm, the raw materials are imported and the national standard original factory, and the 16 quality inspection layers are strictly controlled. It can quickly solve the time-critical problems for you, solve the stamping accuracy problems, and solve the production quality problems. Choose, choose and rest assured!